Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB165 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
NLB165 Side Type can be screened using NLB series references of 30–40 Ton excavators, 200–260 L/min required flow and a 165 mm tool. Compare NLB155 within the lower overlap and NLB160 at 40 Ton, then specify the side mounting interface and actual delivered assembly.
Housing: Side Type
Carrier range: 30-40 Ton
Required oil flow: 200-260 L/min
Tool diameter: 165 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB165 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB165 Side Type
NLB165 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 30-40 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 200-260 L/min |
| Setting pressure | 240-260 bar |
| Operating pressure | 180-200 bar |
| Impact energy | 10846 J |
| Impact rate | 250-350 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 165 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Compare NLB155 within the shared 30–35 Ton interval
NLB165 covers 30–40 Ton and NLB155 covers 28–35 Ton in the series carrier ranges. Their shared interval is 30–35 Ton. NLB165 requires 200–260 L/min and NLB155 requires 180–240 L/min, so their flow references overlap at 200–240 L/min.
Both series rows list 180–200 bar operating pressure, but their nominal tool diameters differ at 165 and 155 mm. Use the documented carrier circuit and the complete tool reference to separate the candidates. A shared pressure entry does not establish identical Side Type attachments.
Keep the 40 Ton boundary with NLB160 explicit
NLB160 starts at 40 Ton and extends to 55 Ton, while NLB165 ends at 40 Ton. Their carrier ranges share only that boundary. NLB160 lists 200–250 L/min and 160–180 bar operating pressure, which differ from the NLB165 series references.
The side bracket needs a dimensioned interface review for the actual carrier or coupler. Identify pin diameters, pin centers, mounting width and any adapter in the drawing scope. Confirm the proposed working geometry rather than assigning compatibility from the higher model number.
Identify the 165 mm tool and package components
The 165 mm series tool diameter supplies one part-identification field. Confirm the upper profile, retaining arrangement, length and requested tip for the quoted build. State additional working tools separately so their complete references remain connected to the selected Side Type configuration.
Ask for the actual complete Side Type assembly mass with bracket, tool and included components identified. Use that mass in the carrier’s attachment-load review. List the hydraulic hoses, fittings and return connection in the package scope without transferring the generic series weight into a Side Type mass claim.
Compare NLB165 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB165 Side Type (this product) | 30-40 | 200-260 | 180-200 | 165 |
| NLB160 Side Type | 40-55 | 200-250 | 160-180 | 160 |
| NLB155 Side Type | 28-35 | 180-240 | 180-200 | 155 |
NLB165 Side Type questions
What happens at a 40 Ton carrier boundary?
The NLB165 and NLB160 series ranges meet there, but their hydraulic references and mounting packages remain distinct. Check the actual circuit, complete Side Type assembly mass and interface before confirming the model.
Pricing and availability for NLB165 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB165 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.