Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB160 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
For NLB160 Side Type, use NLB series references of 40–55 Ton excavators, 200–250 L/min required flow and a 160 mm tool. Compare NLB175 across the shared carrier range and NLB165 at the boundary, then define the actual side bracket, complete mass and connection package.
Housing: Side Type
Carrier range: 40-55 Ton
Required oil flow: 200-250 L/min
Tool diameter: 160 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB160 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB160 Side Type
NLB160 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 40-55 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 200-250 L/min |
| Setting pressure | 210 bar |
| Operating pressure | 160-180 bar |
| Impact energy | 10388 J |
| Impact rate | 300-400 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 160 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Compare two models covering 40–55 Ton
NLB160 and NLB175 share the same series carrier range, but their hydraulic references differ. NLB160 lists 200–250 L/min and 160–180 bar operating pressure. NLB175 lists 210–290 L/min and 180–200 bar. Their flow overlap is 210–250 L/min, while operating pressure meets only at 180 bar.
The tool references also differ at 160 mm for NLB160 and 175 mm for NLB175. Keep the model’s full row connected to the candidate Side Type build. The shared carrier range does not establish the same hydraulic demand, tool identity or side mounting configuration.
Treat 40 Ton as the NLB165 carrier boundary
NLB165 covers 30–40 Ton in the series table, while NLB160 covers 40–55 Ton. The ranges meet only at 40 Ton. The higher model number therefore does not indicate a larger carrier range, and the shared endpoint should not be extended into a broader overlap.
For the actual Side Type installation, identify the carrier or coupler interface with pin diameters, pin centers and mounting width. Include the proposed bracket and any adapter in a single drawing review. Neither the model sequence nor a housing photograph provides those mounting dimensions.
Define the Side Type package without borrowing a weight
Request the mass of the complete quoted Side Type assembly, identifying the bracket, working tool and included components. Compare that arrangement with the carrier’s attachment limits and geometry. The NLB series reference sheet does not establish the actual mass of this side mounting build.
Specify the 160 mm tool’s upper profile, retaining features, length and requested tip. List the included hoses, fittings and adapters alongside it. Keep the installation documents and component references linked to the same order so the delivered attachment and later parts inquiries describe one defined configuration.
Compare NLB160 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB160 Side Type (this product) | 40-55 | 200-250 | 160-180 | 160 |
| NLB165 Side Type | 30-40 | 200-260 | 180-200 | 165 |
| NLB175 Side Type | 40-55 | 210-290 | 180-200 | 175 |
NLB160 Side Type questions
Does the NLB165 name imply a larger Side Type carrier range than NLB160?
No. The series ranges are 30–40 Ton for NLB165 and 40–55 Ton for NLB160, meeting only at 40 Ton. The actual Side Type installation needs separate matching checks.
Pricing and availability for NLB160 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB160 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.