Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB175 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
For NLB175 Side Type, start from NLB series references of 40–55 Ton excavators, 210–290 L/min required flow and a 175 mm tool. NLB160 shares its carrier range, while NLB165 meets it at one endpoint. Confirm the actual side mounting, assembly mass and connection package separately.
Housing: Side Type
Carrier range: 40-55 Ton
Required oil flow: 210-290 L/min
Tool diameter: 175 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB175 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB175 Side Type
NLB175 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 40-55 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 210-290 L/min |
| Setting pressure | 260-280 bar |
| Operating pressure | 180-200 bar |
| Impact energy | 12202 J |
| Impact rate | 250-350 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 175 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Distinguish NLB175 from NLB160 across 40–55 Ton
The shared series carrier range leaves both model names on an initial shortlist. NLB175 lists 210–290 L/min required flow and 180–200 bar operating pressure. NLB160 lists 200–250 L/min and 160–180 bar. Their flow intervals overlap, while their operating-pressure ranges meet only at 180 bar.
NLB175 lists a 175 mm tool and NLB160 lists 160 mm in the series reference. Keep the correct upper profile, retaining features and length with each working-tool candidate. A shared excavator range cannot establish tool interchangeability or the geometry of the Side Type mounting.
Use frequency and energy as separate model references
NLB175 and NLB165 both list 250–350 blows/min in the series table. Their energy references differ at 12,202 J and 10,846 J respectively. These catalog fields distinguish the model rows without establishing a measured Side Type production result for a particular carrier or material.
Their carrier ranges also differ: NLB165 covers 30–40 Ton and NLB175 covers 40–55 Ton. They meet only at the 40 Ton boundary. Keep that limited relationship visible when comparing the actual circuit and mounting arrangement for a machine at the endpoint.
Define the side bracket and complete delivered assembly
Provide a drawing of the actual carrier or coupler interface, identifying pin diameters, pin centers and mounting width. Include any adapter in the same review. The proposed side bracket and working geometry need confirmation against that interface, without dimensions inferred from the type illustration.
Request the actual Side Type assembly mass with bracket, working tool and included components identified. List the hoses, fittings, adapters and any additional tools separately. That defined package supports the carrier-load check and keeps the purchase comparison tied to the attachment being delivered.
Compare NLB175 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB175 Side Type (this product) | 40-55 | 210-290 | 180-200 | 175 |
| NLB165 Side Type | 30-40 | 200-260 | 180-200 | 165 |
| NLB160 Side Type | 40-55 | 200-250 | 160-180 | 160 |
NLB175 Side Type questions
Does matching NLB165 frequency mean the two Side Type builds are equivalent?
No. Their series carrier ranges, flow and tool references differ, and their carrier ranges meet only at 40 Ton. The actual side mounting and complete assembly must be matched independently.
Pricing and availability for NLB175 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB175 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.