Home / Hydraulic Breakers / Box Type
NEWLAND · Box Type
NLB200 Box Type Hydraulic Breaker
NEWLAND Box Type hydraulic breaker — representative image
The NEWLAND NLB200 Box Type hydraulic breaker uses an enclosed housing layout. Start with the NLB model reference range of 50-65 Ton, 260-300 L/min required oil flow and a 200 mm working tool, then confirm the complete mounting and hydraulic package.
Housing: Box Type
Carrier range: 50-65 Ton
Required oil flow: 260-300 L/min
Tool diameter: 200 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Box Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB200 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Currently viewing NLB200 Box Type
Top Type
Side Type
NLB200 specifications
| Specification | Listed value |
|---|---|
| Suitable excavator range | 50-65 Ton |
| Operating weight — series reference | 6205 kg |
| Required oil flow | 260-300 L/min |
| Setting pressure | 300-310 bar |
| Operating pressure | 220-280 bar |
| Impact energy | 21360 J |
| Impact rate | 150-200 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 200 mm |
These figures come from the NEWLAND NLB series specification sheet. Operating weight is a series reference: confirm the quoted housing, bracket, working tool and included components before checking the complete attachment load.
The sheet lists Ton as the carrier-weight unit. Confirm the unit basis against the excavator documentation. Setting pressure and operating pressure are separate fields; these figures are not an installation or adjustment procedure.
Compare NLB200 with NLB195 across the shared carrier interval
NLB200 extends to 65 Ton in the listed excavator range, while NLB195 extends to 60 Ton. Both start at 50 Ton. In their shared 50–60 Ton interval, compare the attachment requirements rather than selecting a model from the carrier weight or nominal tool diameter alone.
NLB200 lists 6,205 kg operating weight and 260–300 L/min required flow. NLB195 lists 5,039 kg and 240–290 L/min. Their operating-pressure ranges are both 220–280 bar, while the flow ranges overlap at 260–290 L/min. The mass and flow differences remain relevant to the actual carrier arrangement.
Read the NLB210 overlap without extending the flow range
NLB210 lists a 60–75 Ton excavator range, giving a shared 60–65 Ton interval with NLB200. Its required flow is 300–330 L/min, while NLB200 requires 260–300 L/min. Those flow ranges meet only at 300 L/min. The wider shared carrier interval does not imply a wider hydraulic overlap.
Both list 220–280 bar operating pressure, but NLB210 has a 210 mm tool and 6,550 kg listed weight. These are distinct model references. Keep each complete specification together when reviewing a carrier in the overlapping range, including the verified mounting and return arrangement.
Use the 200 mm model reference when comparing tools and output
NLB200 lists 21,360 J impact energy and 150–200 blows/min. NLB210 lists 26,520 J and 100–150 blows/min. Comparing these separate fields shows why a higher energy entry alone cannot establish a production advantage for the intended job. The specification does not identify a shared test operating point.
The 200 mm nominal tool diameter also needs a complete part reference for replacement ordering. Check its upper profile, retaining arrangement and length with the appropriate drawing. Keep the confirmed tool and assembly records together so a later parts inquiry refers to the same NLB200 configuration.
Compare NLB200 with related NLB models
Use these catalog figures to shortlist candidates. An overlapping carrier range does not establish hydraulic compatibility or mounting fit.
NLB200 selection questions
How much do NLB200 and NLB210 overlap in required flow?
Only at the 300 L/min boundary. NLB200 lists 260–300 L/min and NLB210 lists 300–330 L/min, even though their suggested excavator ranges overlap from 60 to 65 Ton.
Product categories and related guides
NEWLAND NLB Series Hydraulic Breakers
Hydraulic Breaker Compatibility Checklist: Carrier, Oil Circuit and Mounting
Hydraulic Breaker Specifications Explained: Weight, Energy, Frequency and Power
Hydraulic Breaker Chisel Identification: Photos and Measurements to Send
Pricing and availability for NLB200
Send your excavator details, documented auxiliary flow and pressure, mounting or quick coupler measurements, required housing and package contents, quantity and delivery country. Include photos or drawings of the connection when available.
The email opens with NLB200 already included. You can also use the contact details on our quotation page.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.