Home / Hydraulic Breakers / Box Type
NEWLAND · Box Type
NLB195 Box Type Hydraulic Breaker
NEWLAND Box Type hydraulic breaker — representative image
The NEWLAND NLB195 Box Type hydraulic breaker uses an enclosed housing layout. Start with the NLB model reference range of 50-60 Ton, 240-290 L/min required oil flow and a 195 mm working tool, then confirm the complete mounting and hydraulic package.
Housing: Box Type
Carrier range: 50-60 Ton
Required oil flow: 240-290 L/min
Tool diameter: 195 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Box Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB195 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Currently viewing NLB195 Box Type
Top Type
Side Type
NLB195 specifications
| Specification | Listed value |
|---|---|
| Suitable excavator range | 50-60 Ton |
| Operating weight — series reference | 5039 kg |
| Required oil flow | 240-290 L/min |
| Setting pressure | 300-310 bar |
| Operating pressure | 220-280 bar |
| Impact energy | 17088 J |
| Impact rate | 180-200 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 195 mm |
These figures come from the NEWLAND NLB series specification sheet. Operating weight is a series reference: confirm the quoted housing, bracket, working tool and included components before checking the complete attachment load.
The sheet lists Ton as the carrier-weight unit. Confirm the unit basis against the excavator documentation. Setting pressure and operating pressure are separate fields; these figures are not an installation or adjustment procedure.
Compare NLB195 and NLB200 within 50–60 Ton
NLB195 lists 50–60 Ton excavators and NLB200 lists 50–65 Ton. Throughout their shared 50–60 Ton interval, compare the remaining rows. NLB195 lists 5,039 kg operating weight and a 195 mm tool, against 6,205 kg and a 200 mm tool for NLB200.
The required flow ranges are 240–290 L/min for NLB195 and 260–300 L/min for NLB200. Both list 220–280 bar operating pressure. The shared pressure range does not remove the flow distinction. A carrier’s documented attachment delivery can help narrow the two candidates before the complete installation is assessed.
Understand the single carrier boundary shared with NLB210
NLB195 and NLB210 meet only at 60 Ton in their listed excavator ranges. NLB210 covers 60–75 Ton and requires 300–330 L/min. NLB195 requires 240–290 L/min. These flow ranges do not overlap, even though the suggested carrier ranges touch at that one point.
This distinction matters when comparing proposals for a carrier at the boundary. A similar tonnage entry or matching operating-pressure range does not make the required circuits equivalent. Retain the exact flow range against each candidate, rather than combining the upper and lower values from different models.
Keep energy, frequency and tool identity as separate fields
NLB195 lists 17,088 J impact energy and 180–200 blows/min. NLB200 lists 21,360 J and 150–200 blows/min. The comparison gives separate energy and frequency references. It does not establish breaking speed or output in a particular material, because the catalog does not supply that job-specific operating evidence.
For working-tool selection, the 195 mm nominal diameter starts the identification process. Match the upper profile, retaining features and length to the correct reference. Keep that tool record with the selected attachment and mounting configuration, particularly when the purchase includes additional tools for later replacement.
Compare NLB195 with related NLB models
Use these catalog figures to shortlist candidates. An overlapping carrier range does not establish hydraulic compatibility or mounting fit.
NLB195 selection questions
Does a 60 Ton carrier automatically make NLB195 and NLB210 alternatives?
No. Their carrier ranges meet at 60 Ton, but NLB195 requires 240–290 L/min and NLB210 requires 300–330 L/min. The flow ranges do not overlap.
Pricing and availability for NLB195
Send your excavator details, documented auxiliary flow and pressure, mounting or quick coupler measurements, required housing and package contents, quantity and delivery country. Include photos or drawings of the connection when available.
The email opens with NLB195 already included. You can also use the contact details on our quotation page.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.