Home / Hydraulic Breakers / Top Type
NEWLAND · Top Type
NLB125 Top Type Hydraulic Breaker
NEWLAND Top Type hydraulic breaker — representative image
The NEWLAND NLB125 Top Type hydraulic breaker has a 15–18 Ton reference excavator range, requires 90–120 L/min oil flow and uses a 125 mm tool. Check the upper mounting dimensions and total attachment weight for the configuration you plan to order.
Housing: Top Type
Carrier range: 15-18 Ton
Required oil flow: 90-120 L/min
Tool diameter: 125 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Top Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB125 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Currently viewing NLB125 Top Type
Side Type
NLB125 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Top Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 15-18 Ton |
| Complete assembly operating weight | Confirm the Top Type assembly weight |
| Required oil flow | 90-120 L/min |
| Setting pressure | 210 bar |
| Operating pressure | 150-170 bar |
| Impact energy | 2711 J |
| Impact rate | 350-650 blows/min |
| Hose diameter | 1 inch |
| Tool diameter | 125 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Where NLB125 fits in the Top Type range
NLB125’s 15–18 Ton carrier range sits within NLB120’s 12–18 Ton interval. Its 90–120 L/min reference flow is lower than NLB120’s 115–150 L/min range despite the larger tool diameter. At 18 Ton, NLB135 enters the carrier comparison, but its 125–160 L/min flow range does not overlap NLB125’s. For a Top Type order, retain those separate requirements instead of extending one model’s range to cover another. Confirm the appropriate carrier circuit and Top mounting assembly after deciding which complete specification the proposal follows.
Check the hydraulic specifications
The supplied NLB series reference lists 150–170 Bar operating pressure and 210 Bar setting pressure for NLB125. Operating pressure and setting pressure serve different purposes. Use the applicable installation procedure for any hydraulic adjustment. Impact energy is 2711 J, impact rate is 350–650 Bpm and hose diameter is 1 Inch. Use the series figures to compare models, then request the specification and installation details for the Top Type assembly being quoted.
Confirm the Top mounting package before ordering
Ask for the Top upper mounting drawing with the carrier connection dimensions identified. Include any quick coupler interface in that review. The photo illustrates the Top Type housing. Request a dimensioned drawing for the model you plan to order. Request the complete quoted assembly weight, including the proposed mounting components, and compare it with the permitted attachment load of the carrier. Keep the selected working tool and hose connections in the same package description so the quotation covers the installation being considered.
Compare NLB125 Top Type with nearby models
Compare the model references below alongside the actual Top Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB125 Top Type (this product) | 15-18 | 90-120 | 150-170 | 125 |
| NLB120 Top Type | 12-18 | 115-150 | 160-180 | 120 |
| NLB135 Top Type | 18-25 | 125-160 | 160-180 | 135 |
NLB125 Top Type questions
Can the NLB120 flow range be applied to an NLB125 Top Type inquiry?
No. Keep NLB125’s 90–120 L/min series reference separate from NLB120’s 115–150 L/min. Confirm the final Top configuration and its required circuit, dimensions and complete weight in the technical quotation.
Pricing and availability for NLB125 Top Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Top Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB125 and Top Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.