Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB125 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
The NLB125 Side Type shortlist begins with NLB series references of 15–18 Ton excavators, 90–120 L/min required flow and a 125 mm tool. Read those figures beside NLB120 and the NLB135 boundary, then confirm the side bracket, connection details and actual complete attachment mass.
Housing: Side Type
Carrier range: 15-18 Ton
Required oil flow: 90-120 L/min
Tool diameter: 125 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB125 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB125 Side Type
NLB125 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 15-18 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 90-120 L/min |
| Setting pressure | 210 bar |
| Operating pressure | 150-170 bar |
| Impact energy | 2711 J |
| Impact rate | 350-650 blows/min |
| Hose diameter | 1 inch |
| Tool diameter | 125 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Recognise the distinct NLB125 hydraulic range
NLB125 lists 90–120 L/min required flow and 150–170 bar operating pressure in the series sheet. NLB120 covers the same 15–18 Ton carrier interval within its broader range, but lists 115–150 L/min and 160–180 bar. Their flow overlap is limited to 115–120 L/min.
A higher model number and a larger tool diameter do not establish a higher flow requirement. Keep the complete model row together when screening the actual carrier. This avoids carrying the NLB120 flow range into a Side Type inquiry for the distinct NLB125 configuration.
Check the 18 Ton boundary with NLB135
NLB135 enters the series carrier comparison at 18 Ton, exactly where the NLB125 range ends. Its flow reference is 125–160 L/min, which does not overlap the NLB125 range of 90–120 L/min. A shared carrier endpoint therefore leaves a clear hydraulic difference between the candidates.
For the proposed Side Type build, verify the carrier or coupler interface with pin diameters, pin centers and mounting width. Keep the bracket drawing and any adapter reference linked to the actual carrier configuration. The series carrier range provides no mounting dimensions.
Define the 125 mm tool and complete package
Use the 125 mm series tool diameter with its upper profile, retaining arrangement, length and requested tip. Check shank fit before ordering for the quoted build instead of treating diameter as proof that another working tool will fit. State any additional tools as separate order items.
Request the actual Side Type assembly weight with included bracket and tool components identified. List hoses, fittings and adapters in the package description, then review that complete arrangement against carrier limits. The series specification does not establish the mass of every housing and mounting combination.
Compare NLB125 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB125 Side Type (this product) | 15-18 | 90-120 | 150-170 | 125 |
| NLB120 Side Type | 12-18 | 115-150 | 160-180 | 120 |
| NLB135 Side Type | 18-25 | 125-160 | 160-180 | 135 |
NLB125 Side Type questions
Does the 18 Ton endpoint make NLB135 a direct substitute?
No. The series carrier ranges touch only at 18 Ton, while NLB125 lists 90–120 L/min and NLB135 lists 125–160 L/min. Their required flow ranges do not overlap.
Pricing and availability for NLB125 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB125 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.