Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB195 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
NLB195 Side Type selection uses NLB series references of 50–60 Ton excavators, 240–290 L/min required flow and a 195 mm tool. Compare NLB200 across the shared carrier interval and NLB210 at the upper boundary, then define the side bracket and actual complete attachment package.
Housing: Side Type
Carrier range: 50-60 Ton
Required oil flow: 240-290 L/min
Tool diameter: 195 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB195 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB195 Side Type
NLB195 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 50-60 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 240-290 L/min |
| Setting pressure | 300-310 bar |
| Operating pressure | 220-280 bar |
| Impact energy | 17088 J |
| Impact rate | 180-200 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 195 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Compare NLB200 within the shared 50–60 Ton range
NLB195 covers 50–60 Ton and NLB200 covers 50–65 Ton in the series carrier ranges. Their flow references are 240–290 L/min and 260–300 L/min respectively, sharing 260–290 L/min. Both list 220–280 bar operating pressure, while their nominal tool diameters differ at 195 and 200 mm.
The common pressure range leaves the flow distinction and installation questions unresolved. Use the carrier’s documented attachment delivery to screen the two complete model rows. Keep the series references separate from any claim that the actual Side Type housing has undergone a model-specific performance test.
Read the NLB210 boundary without extending the flow range
NLB210 starts at 60 Ton in the series carrier table, exactly where NLB195 ends. Those carrier ranges share only the 60 Ton boundary. NLB210 requires 300–330 L/min, while NLB195 requires 240–290 L/min. The required flow intervals do not overlap.
A carrier at that shared endpoint still needs a distinct hydraulic review for each candidate. The side mounting also requires a drawing of pin diameters, pin centers and mounting width for the actual carrier or coupler. Include any adapter so the complete connection geometry is defined.
Confirm the 195 mm tool and Side Type assembly scope
Identify the requested working tool using the 195 mm series diameter with the correct upper profile, retaining features and length. State the desired tip and any additional tools in the package description. Keep those references connected to the same quoted Side Type build.
Request the actual complete assembly mass, identifying the bracket, working tool and other included components before checking carrier load limits. List hoses, fittings and adapters individually. The series sheet does not establish a confirmed Side Type assembly weight for every mounting arrangement.
Compare NLB195 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB195 Side Type (this product) | 50-60 | 240-290 | 220-280 | 195 |
| NLB200 Side Type | 50-65 | 260-300 | 220-280 | 200 |
| NLB210 Side Type | 60-75 | 300-330 | 220-280 | 210 |
NLB195 Side Type questions
Does the shared 60 Ton boundary make NLB210 a direct alternative?
No. The series carrier ranges touch at 60 Ton, but NLB195 requires 240–290 L/min and NLB210 requires 300–330 L/min. Their flow intervals do not overlap, and each Side Type installation needs review.
Pricing and availability for NLB195 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB195 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.