Home / Hydraulic Breakers / Box Type
NEWLAND · Box Type
NLB210 Box Type Hydraulic Breaker
NEWLAND Box Type hydraulic breaker — representative image
The NEWLAND NLB210 Box Type hydraulic breaker uses an enclosed housing layout. Start with the NLB model reference range of 60-75 Ton, 300-330 L/min required oil flow and a 210 mm working tool, then confirm the complete mounting and hydraulic package.
Housing: Box Type
Carrier range: 60-75 Ton
Required oil flow: 300-330 L/min
Tool diameter: 210 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Box Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB210 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Currently viewing NLB210 Box Type
Top Type
Side Type
NLB210 specifications
| Specification | Listed value |
|---|---|
| Suitable excavator range | 60-75 Ton |
| Operating weight — series reference | 6550 kg |
| Required oil flow | 300-330 L/min |
| Setting pressure | 300-330 bar |
| Operating pressure | 220-280 bar |
| Impact energy | 26520 J |
| Impact rate | 100-150 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 210 mm |
These figures come from the NEWLAND NLB series specification sheet. Operating weight is a series reference: confirm the quoted housing, bracket, working tool and included components before checking the complete attachment load.
The sheet lists Ton as the carrier-weight unit. Confirm the unit basis against the excavator documentation. Setting pressure and operating pressure are separate fields; these figures are not an installation or adjustment procedure.
A distinct specification for the 60–75 Ton carrier range
NLB210 lists 6,550 kg operating weight and a 210 mm working tool. Its required flow of 300–330 L/min is the highest listed flow range in this NLB catalog. Treat these figures as a linked selection record, rather than judging the attachment from the model number or tool diameter alone.
NLB200 shares the 60–65 Ton part of the carrier range, but its required flow is 260–300 L/min. The two flow ranges meet only at 300 L/min. A carrier inside the shared tonnage interval still needs its actual attachment-circuit delivery checked against the separate candidate rows.
Compare the boundary with NLB195 carefully
NLB195 lists 50–60 Ton excavators, so it meets NLB210 only at the 60 Ton carrier boundary. Its 240–290 L/min flow range does not overlap NLB210’s 300–330 L/min range. Both list 220–280 bar operating pressure, which illustrates why matching pressure alone leaves a significant compatibility question.
The tool and mass entries also differ: NLB195 lists a 195 mm tool and 5,039 kg operating weight. NLB210 lists 210 mm and 6,550 kg. Keep these source reference masses separate from the complete installed attachment calculation, which must reflect the actual quoted assembly and mounting arrangement.
Plan around the model specification and the actual job
NLB210 lists 26,520 J impact energy and 100–150 blows/min. These are the highest impact-energy figure and lowest impact-rate range in the supplied series. They describe catalog specifications, rather than a measured production result for a particular material, fragment size or working position.
A useful NLB210 selection record connects those figures with the carrier, mounting geometry and intended task. For tool purchases, the 210 mm diameter is one identification point alongside the upper profile, retaining arrangement and length. Retaining these references helps keep the breaker proposal and any accompanying working tools consistent.
Compare NLB210 with related NLB models
Use these catalog figures to shortlist candidates. An overlapping carrier range does not establish hydraulic compatibility or mounting fit.
NLB210 selection questions
Are other hydraulic breaker models available beyond NLB210?
NLB210 is one of the models shown on this website. Additional models and configurations are available; send your carrier details and job requirements to discuss a suitable option.
Pricing and availability for NLB210
Send your excavator details, documented auxiliary flow and pressure, mounting or quick coupler measurements, required housing and package contents, quantity and delivery country. Include photos or drawings of the connection when available.
The email opens with NLB210 already included. You can also use the contact details on our quotation page.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.