Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB210 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
NLB210 Side Type can be screened using NLB series references of 60–75 Ton excavators, 300–330 L/min required flow and a 210 mm tool. Compare NLB200 near the lower carrier boundary, then specify the side bracket interface, actual complete mass and the components included in the installation package.
Housing: Side Type
Carrier range: 60-75 Ton
Required oil flow: 300-330 L/min
Tool diameter: 210 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB210 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB210 Side Type
NLB210 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 60-75 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 300-330 L/min |
| Setting pressure | 300-330 bar |
| Operating pressure | 220-280 bar |
| Impact energy | 26520 J |
| Impact rate | 100-150 blows/min |
| Hose diameter | 1-1/4 inch |
| Tool diameter | 210 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Use the 60–75 Ton series range with the flow reference
NLB210 is one of the models shown here; additional models and configurations are available on inquiry. Its 300–330 L/min required-flow reference differs from NLB200 at 260–300 L/min. Their carrier ranges overlap from 60 to 65 Ton, but their required flow ranges meet only at the 300 L/min boundary.
Both series rows list 220–280 bar operating pressure, with different tool diameters of 210 and 200 mm. Keep the complete model data together when screening the carrier. The shared pressure range does not establish an identical hydraulic match or a tested Side Type performance comparison.
Keep the NLB195 endpoint distinct from a broad overlap
NLB195 covers 50–60 Ton and NLB210 covers 60–75 Ton in the series reference. They meet only at 60 Ton. NLB195 requires 240–290 L/min, which does not overlap the NLB210 requirement of 300–330 L/min. The carrier endpoint therefore leaves a clear circuit distinction.
For the proposed Side Type build, check pin diameters, pin centers and mounting width using the actual carrier or coupler drawing. Identify any adapter with the side bracket. The installation geometry needs this dimensional record rather than a fit inferred from the model designation.
Define the 210 mm tool and actual assembly package
The 210 mm tool diameter is a series identification reference. Confirm the upper tool profile, retaining arrangement, length and requested tip for the quoted build. Record any additional tools individually so their full references stay linked to the intended Side Type configuration.
Request the complete Side Type assembly mass with bracket, working tool and included components identified. Use that actual package with the carrier’s permitted attachment limits. List hoses, fittings and adapters separately; the series sheet does not confirm the weight of every housing and mounting combination.
Compare NLB210 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB210 Side Type (this product) | 60-75 | 300-330 | 220-280 | 210 |
| NLB200 Side Type | 50-65 | 260-300 | 220-280 | 200 |
| NLB195 Side Type | 50-60 | 240-290 | 220-280 | 195 |
NLB210 Side Type questions
Is the NLB210 series range enough to approve a Side Type installation?
No. The series carrier and flow references are initial filters. The actual side bracket, complete assembly mass, hydraulic connections and carrier limits still need to be matched for the quoted build.
Pricing and availability for NLB210 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB210 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.