Home / Hydraulic Breakers / Top Type
NEWLAND · Top Type
NLB140 Top Type Hydraulic Breaker
NEWLAND Top Type hydraulic breaker — representative image
The NEWLAND NLB140 Top Type hydraulic breaker has a 18–26 Ton reference excavator range, requires 120–180 L/min oil flow and uses a 140 mm tool. Check the upper mounting dimensions and total attachment weight for the configuration you plan to order.
Housing: Top Type
Carrier range: 18-26 Ton
Required oil flow: 120-180 L/min
Tool diameter: 140 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Top Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB140 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Currently viewing NLB140 Top Type
Side Type
NLB140 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Top Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 18-26 Ton |
| Complete assembly operating weight | Confirm the Top Type assembly weight |
| Required oil flow | 120-180 L/min |
| Setting pressure | 210-230 bar |
| Operating pressure | 160-180 bar |
| Impact energy | 4067 J |
| Impact rate | 350-500 blows/min |
| Hose diameter | 1 inch |
| Tool diameter | 140 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Where NLB140 fits in the Top Type range
NLB140 shares 18–25 Ton with NLB135, while its overlap with NLB150 is narrower at 25–26 Ton. NLB140’s reference flow of 120–180 L/min meets NLB150’s 175–220 L/min only from 175 to 180 L/min. A carrier inside the shared weight interval may therefore lead to different hydraulic proposals. For a Top Type purchase, keep the chosen model’s mounting drawing, circuit requirements and complete attachment load as one package. The wider NLB140 carrier interval does not establish universal upper-bracket compatibility or a guaranteed result on the intended material.
Check the hydraulic specifications
The supplied NLB series reference lists 160–180 Bar operating pressure and 210–230 Bar setting pressure for NLB140. Operating pressure and setting pressure serve different purposes. Use the applicable installation procedure for any hydraulic adjustment. Impact energy is 4067 J, impact rate is 350–500 Bpm and hose diameter is 1 Inch. Use the series figures to compare models, then request the specification and installation details for the Top Type assembly being quoted.
Confirm the Top mounting package before ordering
Ask for the Top upper mounting drawing with the carrier connection dimensions identified. Include any quick coupler interface in that review. The photo illustrates the Top Type housing. Request a dimensioned drawing for the model you plan to order. Request the complete quoted assembly weight, including the proposed mounting components, and compare it with the permitted attachment load of the carrier. Keep the selected working tool and hose connections in the same package description so the quotation covers the installation being considered.
Compare NLB140 Top Type with nearby models
Compare the model references below alongside the actual Top Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB140 Top Type (this product) | 18-26 | 120-180 | 160-180 | 140 |
| NLB135 Top Type | 18-25 | 125-160 | 160-180 | 135 |
| NLB150 Top Type | 25-35 | 175-220 | 160-180 | 150 |
NLB140 Top Type questions
Can NLB140 and NLB150 Top Type be compared for a 25 Ton carrier?
Yes, as initial candidates. The series flow ranges overlap only from 175 to 180 L/min. Confirm the available circuit and the dimensions and complete weight of each quoted Top assembly before choosing.
Pricing and availability for NLB140 Top Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Top Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB140 and Top Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.