Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB140 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
NLB140 Side Type can be screened using the NLB series references of 18–26 Ton excavators, 120–180 L/min required flow and a 140 mm tool. Compare NLB135 across the main shared range and NLB150 near the upper boundary, then define the side mounting and complete delivered assembly.
Housing: Side Type
Carrier range: 18-26 Ton
Required oil flow: 120-180 L/min
Tool diameter: 140 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB140 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB140 Side Type
NLB140 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 18-26 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 120-180 L/min |
| Setting pressure | 210-230 bar |
| Operating pressure | 160-180 bar |
| Impact energy | 4067 J |
| Impact rate | 350-500 blows/min |
| Hose diameter | 1 inch |
| Tool diameter | 140 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Read the broad flow interval with the actual carrier
The NLB140 series reference gives 120–180 L/min required flow and 160–180 bar operating pressure. NLB135 lists 125–160 L/min with the same operating-pressure range. Their suggested carrier intervals are 18–26 Ton and 18–25 Ton, so many initial carrier shortlists can contain both model names.
NLB140 lists 4,067 J impact energy and 350–500 blows/min in the series data. NLB135 lists 3,692 J and 350–600 blows/min. These separate catalog references distinguish the models without establishing a tested Side Type production result or a universal ranking.
Check the narrow overlap with NLB150
NLB150 overlaps NLB140 from 25 to 26 Ton in the series carrier ranges. Their required flows overlap at 175–180 L/min, with NLB150 listing 175–220 L/min overall. The narrow overlap makes the carrier’s documented attachment supply a useful way to separate the candidate rows.
The Side Type mounting still needs its own interface drawing. Identify pin diameters, pin centers and mounting width for the actual carrier or coupler, including any adapter. Check the proposed bracket and working geometry as part of the complete installation.
Define the 140 mm tool and order components
A 140 mm nominal tool diameter is one series identification field. Confirm the upper profile, retaining features, overall length and requested tip for the quoted build. Keep any additional tool listed separately so its reference and intended configuration remain clear.
Request the actual Side Type assembly mass with the bracket, working tool and included components identified. List hoses, fittings and adapters in the package scope. Assess that complete arrangement against carrier attachment limits, without transferring the series weight into an unverified Side Type mass claim.
Compare NLB140 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB140 Side Type (this product) | 18-26 | 120-180 | 160-180 | 140 |
| NLB135 Side Type | 18-25 | 125-160 | 160-180 | 135 |
| NLB150 Side Type | 25-35 | 175-220 | 160-180 | 150 |
NLB140 Side Type questions
How much do NLB140 and NLB150 overlap?
Their series carrier ranges share 25–26 Ton and their flow ranges share 175–180 L/min. Those intervals provide a comparison area, while mounting and the complete Side Type configuration remain separate checks.
Pricing and availability for NLB140 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB140 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.