Home / Hydraulic Breakers / Side Type
NEWLAND · Side Type
NLB150 Side Type Hydraulic Breaker
NEWLAND Side Type hydraulic breaker — representative image
For NLB150 Side Type, the NLB series references are 25–35 Ton excavators, 175–220 L/min required flow and a 150 mm tool. Compare the circuit and connection references with NLB155, then define the side mounting geometry, actual assembly weight and components included in the proposed package.
Housing: Side Type
Carrier range: 25-35 Ton
Required oil flow: 175-220 L/min
Tool diameter: 150 mm
Excavator ranges and hydraulic specifications are NLB series reference values. Confirm the complete Side Type assembly and attachment mass for your carrier.
This page shows one model from our range. Contact NEWLAND for other models, excavator weight ranges and tool diameters.
Choose your NLB150 housing type
Compare the three housing layouts for the same NLB model. The photos illustrate the housing layouts. Use the drawing for the selected model to check dimensions and mounting fit.
Box Type
Top Type
Side Type
Currently viewing NLB150 Side Type
NLB150 model reference specifications
These figures are NLB series reference values for initial model comparison. Request the total operating weight for the quoted Side Type assembly, including the mounting components and tool.
| Specification | Series specifications / configuration notes |
|---|---|
| Suitable excavator range | 25-35 Ton |
| Complete assembly operating weight | Confirm the Side Type assembly weight |
| Required oil flow | 175-220 L/min |
| Setting pressure | 210 bar |
| Operating pressure | 160-180 bar |
| Impact energy | 5193 J |
| Impact rate | 300-450 blows/min |
| Hose diameter | 1 inch |
| Tool diameter | 150 mm |
Carrier weights use the catalog unit “Ton.” Confirm the unit basis when comparing them with your excavator specifications. Setting pressure and operating pressure are separate fields. Use the specification and mounting drawing for the quoted assembly to check the final installation.
Compare the shared 28–35 Ton carrier interval
NLB155 covers 28–35 Ton in the series table, within the NLB150 carrier range of 25–35 Ton. NLB150 lists 175–220 L/min and 160–180 bar operating pressure. NLB155 lists 180–240 L/min and 180–200 bar, so their operating-pressure ranges meet only at 180 bar.
Both series rows list 300–450 blows/min, but that common frequency reference does not establish equivalent output or an identical hydraulic installation. The tools differ at 150 and 155 mm. Keep each model’s complete data row with the candidate Side Type build.
Confirm the side bracket and hydraulic connection scope
Identify the actual carrier or coupler interface with a drawing of pin diameters, pin centers and mounting width. Include any adapter in the side bracket review. The installation needs the proposed geometry and components defined rather than a fit inferred from the housing type.
NLB150 lists a 1 Inch hose diameter in the series reference, compared with 1-1/4 Inch for NLB155. Confirm the actual fittings, line routing and return arrangement. Those connection details should follow the selected build and carrier circuit, with included components stated individually.
Keep the lower boundary and complete assembly separate
NLB140 shares only the 25–26 Ton carrier interval with NLB150. Its 120–180 L/min flow range overlaps the NLB150 flow reference at 175–180 L/min. Retain those limited intervals if the purchasing shortlist includes both models for a carrier near the boundary.
Ask for the complete Side Type assembly mass with bracket, working tool and any adapters identified. Confirm the 150 mm tool’s upper profile, retention details and length as part of that package. The NLB series weight does not establish an actual mass for this mounting configuration.
Compare NLB150 Side Type with nearby models
Compare the model references below alongside the actual Side Type attachment mass, mounting interface and documented carrier circuit.
| Model / housing | Excavator range (Ton) | Required oil flow (L/min) | Operating pressure (bar) | Tool diameter (mm) |
|---|---|---|---|---|
| NLB150 Side Type (this product) | 25-35 | 175-220 | 160-180 | 150 |
| NLB155 Side Type | 28-35 | 180-240 | 180-200 | 155 |
| NLB140 Side Type | 18-26 | 120-180 | 160-180 | 140 |
NLB150 Side Type questions
Does the shared impact-rate range make NLB150 and NLB155 the same choice?
No. Their series flow, operating pressure, tool diameter and hose references differ. The actual Side Type mounting and delivered assembly also need to be matched to the carrier.
Pricing and availability for NLB150 Side Type
Send the carrier details, documented flow and pressure, mounting or quick coupler measurements, requested Side Type package, quantity and delivery country. Ask for the total weight and included components to be listed in your quote.
The email includes NLB150 and Side Type in your inquiry.
Send your inquiry
Include the product or part, quantity and delivery country. For replacement parts, add the breaker model, part number or key dimensions if available.
Have photos or drawings? Email them to gordon@newlandbreaker.com. Please also read our privacy notice.